New 661R EFI QuikTrak™ Stand-On Mower

Commercial Mowers
REQUEST A QUOTE

Starting at: $10,779.00

REQUEST A QUOTE
Key Features
  • Compact design for easy hauling
  • Hydrostatic drive system
  • Commercial-quality engine
  • Easy to maintain

More Info

Features

Maintenance is simple and easy to reduce time and cost
QuikTrak™ 652E mowingQuikTrak™ 652E mowing
Open engine compartmentOpen engine compartment

All service components are easy to access:

  • Servicing is simplified because of the open engine compartment.
  • All service and maintenance points are within easy reach.
Heavy-duty canister-type air cleanerHeavy-duty canister-type air cleaner
Engine oil fill/check tube, oil filter, and oil drainEngine oil fill/check tube, oil filter, and oil drain

Canister-type heavy-duty air cleaner is easy to reach and easy to service:

  • Air cleaner has two filter elements; a large outer filter and a smaller inner safety filter.
  • Both filters are easy to access and easy to change.

Engine oil service points are grouped together in easy-to-reach locations:

  • Reduces the time required to check and/or change the oil and filter.
Leaning pad raised for service accessLeaning pad raised for service access
Periodic service chartPeriodic service chart

Simply raising the leaning pad exposes the hydrostatic oil reservoir, control linkage and other service areas.

 

A periodic service chart is provided on the back of the leaning pad for convenience in keeping up on required service.

Front tow holeFront tow hole
Rear tow holeRear tow hole

Four tow holes, two at the front and two at the rear, are provided for safely towing or anchoring the vehicle.

Easy-to-remove access panelEasy-to-remove access panel
Hydrostatic transmission control linkageHydrostatic transmission control linkage

One large knob is used to remove service access shields on the mower deck, battery box, etc.:

  • Panels are easy to remove and install.

Threaded ball and socket rod ends are used throughout the QuikTraks:

  • Provide precise control over a long period of time
  • Easily replaced when necessary
Hydrostatic pump maintenance accessHydrostatic pump maintenance access
Transmission tow valveTransmission tow valve

Access to check and service the hydrostatic pumps and motors is readily available at the rear of the machine.

 

Transmission tow valves are located on the hydrostatic pumps to enable moving the vehicle without the engine running.

Battery boxBattery box
Battery cover removed for service accessBattery cover removed for service access

Secure battery box is provided to protect the battery, for reliable operation:

  • Cover is easily removed for servicing the battery.
Maximize performance and efficiency with powerful electronic fuel injected (EFI) engine
Engine equipped with electronic fuel injectionEngine equipped with electronic fuel injection
Heavy-duty dual stage air cleanerHeavy-duty dual stage air cleaner

A commercial-quality 24.6-hp* (18.3-kW) at 3600 rpm air-cooled engine with electronic fuel injection (EFI) powers the QuikTrak™ Mower:

  • Overhead valve design
    • More horsepower and torque per cubic inch of displacement
    • Better fuel efficiency
  • Electronic fuel injection (EFI)
    • Closed loop system for improved control of air/fuel mixture
    • Immediate starting in hot or cold ambient temperatures or after long periods of seasonal storage
    • No choke linkage for the user to operate
    • No engine warmup required, so the mower can be engaged immediately after the engine starts
    • Greater horsepower and torque responsiveness
    • Higher reliability with the elimination of vapor locking, misfiring, run-on, and after-bang
    • Automatic altitude compensation
    • Delivers fuel precisely
    • Reduces the potential for plug fouling 
    • Standard dual-element, canister-type, dry replaceable heavy-duty air cleaner with secondary safety element
  • V-twin design
    • Fast starts
    • Smooth operation
  • Vertical shaft for efficient transfer of power to the transmission
Large, replaceable fuel filterLarge, replaceable fuel filter
Engine oil coolerEngine oil cooler
  • Fuel pump for consistent and reliable fuel supply to the carburetor
  • 50-state compliant engine, which complies with strict U.S. Environmental Protection Agency and California Air Resource Board emission standards, without loss of horsepower or torque
  • Full-pressure lubrication with full-flow filter

    • Reduces engine wear by ensuring proper lubrication, even when operating on hillsides or uneven terrain
    • Helps keep oil clean for increased engine life
    • Oil cooler helps keep engine at optimum temperature
  • Air-cooled engine design for minimum maintenance and maximum reliability
  • Aluminum cylinder block
    • Effectively dissipates heat
    • Lightweight and strong construction
    • Extends engine life due to elimination of debilitating engine temperatures
Easy-to-access engine oil filter and drainEasy-to-access engine oil filter and drain

Engine is equipped with a replaceable oil filter for longer engine life.

 

Engine oil filter and oil drain are located close together for easy and convenient service.

*The engine horsepower and torque information are provided by the engine manufacturer
to be used for comparison purposes only. Actual operating horsepower and torque will be less.
Refer to the engine manufacturer’s website for additional information.

Controls are easy to locate and use for operator comfort and productivity
QuikTrak™ mowing (652R shown)QuikTrak™ mowing (652R shown)
Control console (652E shown)Control console (652E shown)

 Controls are color coded and logically placed to make them easy for the operator to find and use:

  • Ground speed and direction are easily controlled by moving the two hand-lever hydrostatic drive controls forward or reverse.
    • Speeds are infinitely variable up to 9.5 mph (15.3 km/h) forward and 5.5 mph (8.9 km/h) reverse.
    • A positive neutral-lock position for the levers provides added safety.
  • Two stationary reference bars are provided for operator convenience and security.
    • Front reference bar is included to control speed and reduce fatigue from control lever operation.
    • Rear reference bar is included to make reverse operation easy while maintaining operator confidence.
  • Control levers return to neutral automatically for safety and convenience.
  • Separate choke is easy to locate and use.

    • It is obvious whether the choke is on or not.
    • Less adjustment is needed with the separate choke.
Brake lever (engaged position)Brake lever (engaged position)
Brake barBrake bar

A tire brake is provided to give stability for parking the vehicle on hillsides and for transport; it should be engaged whenever the machine is not being used:

  • Brake must be engaged to start the machine, for added safety.
  • The tire brake is easily adjusted, if necessary, to maintain effective operation.
Mower deck height-of-cut adjustment (648R, 652R, 661R)
Mower deck lift handle (648R, 652R, 661R)Mower deck lift handle (648R, 652R, 661R)
Mower deck height-of-cut adjustment (648R, 652R, 661R)Mower deck height-of-cut adjustment (648R, 652R, 661R)

On the 648R, 652R, 652R EFI, 661R, and 661R EFI QuikTraks, an easy-to-use cutting height adjustment system allows the operator to adjust the mower deck cutting height with no tools and minimal effort:

  • Pull the lift lever back to the full-raised position.
  • Remove the tethered pin and place it at the desired cutting height.
  • Lower the lift lever; the lift lever and mower will stop at the desired cutting height.

 

NOTE: Additional information on mower cutting height adjustment can be found in the mower deck section.

61-in. (155-cm) fabricated mower deck is stamped from 7-gauge, 0.177-in. (4.6-mm) steel for reliability and performance
QuikTrak™ mower deck (652R shown)QuikTrak™ mower deck (652R shown)
Mower-deck reinforcement (652R shown)Mower-deck reinforcement (652R shown)

A well-designed mower deck can make the difference between just getting the job done and getting eye-catching results. The 7-gauge, 0.177-in. (4.6-mm) fabricated mower deck delivers a higher quality of cut in more diverse conditions to enhance mowing performance and the opportunity for profit for lawn-care businesses.

 

Key features of the fabricated mower deck include: 

  • The mower deck is manufactured from 7-gauge, 0.177-in. (4.6-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
  • A compact footprint delivers greater maneuverability when working in tight quarters.
  • A deep-deck design delivers excellent airflow so material is processed quickly and efficiently.
  • A powerful vacuum effect is created by the deck's unique air-flow design, which pulls more grass upright so that the blades can cut more evenly.

Flexible mower-discharge deflectorFlexible mower-discharge deflector
Large, inset caster wheelsLarge, inset caster wheels

 

The wide-discharge opening and raised deflector provide even clipping dispersal for an excellent finished appearance in all conditions.

 

Caster wheels with flat-free tires contribute to a smooth, even cutting job:

  • Large, flat-free caster wheels carry the mower deck smoothly over the lawn.
  • Caster wheels are recessed to reduce the vehicle footprint and turning radius.
    • With the wheels less exposed, there is less chance they'll get snagged by immovable obstacles, thus improving maneuverability and reducing damage.

Anti-scalp rollers are double-captured for durability. They enable the deck to float over the ground and provide a smooth, level cut on even the most challenging terrain.

Mower lift lever (raised position)Mower lift lever (raised position)
Mower lift spring and lever (minimum cut-height position)Mower lift spring and lever (minimum cut-height position)

The QuikTrak is equipped with a floating mower deck that offers several advantages over a fixed mower deck:

  • The lift lever allows the operator to raise the mower to the full-up position from the operator's station.
    • Convenient when transporting from one mowing area to another and when loading on a trailer or truck
    • Allows the operator to raise the mower over roots or other obstructions in the lawn on the fly
  • Lift-assist springs reduce the effort required to raise the mower deck.
Cutting and discharging features
Cutting-height adjustmentCutting-height adjustment
Easy-to-remove mower deck shieldsEasy-to-remove mower deck shields

Mower cutting height can be set from 1.5 in. (3.8 cm) to 5 in. (12.7 cm) in 0.25-in. (0.64-cm) increments:

  • Pull the lift lever back to the full-raised position.
  • Remove the tethered pin and place it at the desired cutting height.
  • Lower the lift lever; the lift lever and mower will stop at the desired cutting height.

 

Mower deck shields are easy to remove, with one knob, for access to the drive belt and other service points.

Optional mulching attachment
Optional mulching attachment and blades (similar design shown)Optional mulching attachment and blades (similar design shown)
#

Optional mulching attachment and special mulching blades are available:

  • This is a high-performance mulching attachment that includes formed steel baffles to control the material for superior performance.
  • The special mulching blades can also be used for side discharging, though overall cutting performance may be slightly less than with the standard blades.
Hydrostatic drive system is reliable and easy to use
QuikTrak 652R mowingQuikTrak 652R mowing
Hydrostatic pumpsHydrostatic pumps

QuikTrak™ Mowers use a heavy-duty hydrostatic pump and wheel-motor drive system that gives reliable and consistent performance and long life:

  • Heavy-duty components stand up to the rigors of commercial use.
  • Individual pump and wheel motor design allows placement of these heavy components low in the vehicle for a low center of gravity and excellent hillside stability.

Two Hydro-Gear™ 0.73 cu in. (12-cc) axial piston, variable displacement pumps provide hydraulic power to the wheel motors:

  • Pumps are linked to the hand-control levers to allow the operator to make speed and direction changes.
  • Rugged construction is ideal for high-performance commercial use.
  • Piston design gives efficient and consistent performance. 
  • A replaceable hydraulic filter helps ensure long life of the pumps and wheel motors.

Two individual 15-cu in. (245.8-cc) piston wheel motors power the QuikTrak drive wheels. Their heavy-duty construction and super-efficient axial-piston design provides superior performance and seamless power to the wheels:

  • Integrated high-pressure shaft seal gives greater reliability.
  • Large bearings are designed with the capacity to carry heavier loads and give long life.
Transmission oil filterTransmission oil filter
Transmission fluid oil reservoirTransmission fluid oil reservoir

A spin-on type replaceable hydraulic oil filter is conveniently located:

  • Extends life of transmission components by keeping oil clean
  • Easy-to-reach for easy and fast service

 

A hydraulic fluid oil reservoir is located behind the leaning pad:

  • Located in a cleaner environment
  • Easy to access for inspection and service
Transmission tow valveTransmission tow valve

 

Transmission tow valves are provided on each hydrostatic pump to permit moving the QuikTrak without the engine running.

Hydro-Gear is a U.S.-registered trademark of Hydro-Gear Company.

Compact design for easy hauling and excellent maneuverability
Overhead view of 652E showing compact designOverhead view of 652E showing compact design
Side view of 652E showing compact designSide view of 652E showing compact design

From the operator's platform to the mower deck, John Deere QuikTrak™ Mowers have a compact and functional design:

  • The compact design allows the QuikTrak to operate in areas that a larger machine cannot. Often, this means the area can be mowed with a QuikTrak so it is not necessary to switch to a walk-behind mower.
  • With the compact design of QuikTrak Mowers, less space is required on a truck or trailer - which can mean there is room for an extra mower, resulting in saved time and money.
Mowing a tight area with QuikTrak 652RMowing a tight area with QuikTrak 652R
QuikTrak 652R mowing on side slopeQuikTrak 652R mowing on side slope

Whether mowing hills or on the level, trimming or mowing straight-away, the operator of a John Deere QuikTrak is able to affect the performance of the machine with their body:

  • The compact design of the QuikTrak allows the operator to use their body to help control the machine.
  • The innovative QuikTrak design puts the center of gravity at the operator's feet where body weight can be used to keep traction on the higher wheels to mow across slopes at higher speeds with greater control.
  • Faster ground speeds get work done quicker.
  • Less polar motion means quicker turns.
  • Better traction on slopes gives more control and increased productivity.
  • Superior stability gives more control and confidence when mowing hillsides.
  • Better visibility allows more-timely operator reaction to the terrain and obstructions.
  • Standing area is designed for improved range of motion to allow the operator more room to move and avoid obstacles.
  • Minimal operator-station obstruction allows safe and fast exits for clearing mower-path obstacles.
  • Operator area is designed for more comfort and less fatigue.
Inset caster wheels (652E shown)Inset caster wheels (652E shown)
Inset caster wheels (652R shown)Inset caster wheels (652R shown)

John Deere QuikTraks are designed, tested, and manufactured to provide the best commercial mowing machines available:

  • Bull-nosed shape of front edge of mower deck allows caster wheels to be set back further, closer to the blades, for more effective ground following.
  • Compact design takes less space for mowing tighter areas and may allow room for an extra machine when hauling to the worksite.
Safety features are built-in to protect the operator and bystanders
Operator mowing with QuikTrak™ 652ROperator mowing with QuikTrak™ 652R
Mower discharge deflectorMower discharge deflector
Curb wheelsCurb wheels
#

Key safety features of QuikTraks include:

  • Operator presence starting system

    • Operator on platform
    • Park brake engaged
    • Power take-off (PTO) disengaged
    • Control levers in neutral
    • Ignition key used to start the engine
  • A high-quality polyethylene mower-discharge deflector
    • Deflects if it strikes a solid obstruction, causing less damage
    • Returns to its original shape and function
  • Operator station designed to allow fast exit
  • Two large curb wheels
  • Easy to remove and replace shields
  • Stationary handles on either side of the traction controls for operator security
  • Control levers return to neutral when released
Mower deck safety certification

QuikTrak mower decks are evaluated by the manufacturer (John Deere Turf Care) and conform to ANSI B71.4 2004 safety certification specifications for commercial turf care equipment.

Specifications

Engine
Manufacturer
Model no. ECV740 EFI
Horsepower (gross) At 3,600 rpm, 25 hp
18.6 kW
Displacement 45.6 cu in.
747 cc
Cylinders Two, V-twin
Crankcase capacity
Oil filter Full flow, replaceable
Lubrication Full pressure
Cooling Forced air
Air cleaner Heavy-duty canister with safety element
Fuel system
Fuel type Gasoline, electronic fuel injection,
Fuel consumption
Fuel tank capacity 5.6 U.S. gal.
21.2 L
Fuel tank switch/shut-off valve Yes
Electrical system
Charge system At 3,600 rpm. 20 amp
Battery voltage 12 V
Cold cranking amp
Hour meter Digital
Operator presence starting system Yes
Drivetrain
Hydraulic pumps Hydro-Gear with fans, 0.73 cu in.
12 cc
Wheel motors Hydro-Gear, 15 cu in.
246 cc
Travel speed Forward
0-9.6 mph
0-15.4 km/hReverse
0-5.5 mph
0-8.9 km/h
Speed and direction control Twin hand-controlled levers
Hydraulic capacity With filter-wet, 2.9 qt
2.7 L
Dry, 5 qt
4.7 L
Hydraulic oil cooler
Filter Spin-on replaceable
Tires
Drive tires 20x10-8 Turf Master
Rear tires
Load rating 4 PR
Brakes
Dynamic braking Dual hand-controlled levers
Park brake Tire engagement
Park brake actuation Hand lever
PTO
Type Electro-Magnetic with brake, 200 lb-ft
271 Nm
Drive Dual B-section V-belt with Kevlar? cord
Mower decks
Available widths 61 in.
155 cm
Deck construction Fabricated steel, floating mount system
Deck thickness 7 gauge
0.18 in.
4.6 mm
Discharge Side
Height-of-cut range Increments
0.25 in.
0.64 cm
1.5-5 in.
3.8-12.7 cm
Cutting width 61 in.
155 cm
Blades
Length
Thickness
Tip speed 18,900 fpm
5,761 m/min
Number Three
Wheels
Caster wheel type No-flat semi-pneumatic with sealed bearings
Caster wheel size 13x6.5-6
Front anti-scalp rollers Center, left
Rear anti-scalp rollers
Dimensions
Length 68 in.
172.7 cm
Width Deflector down, 75 in.
190.5 cm
Height 47 in.
119 cm
Weight 998 lb
452.7 kg
Additional information
Date collected 21-Apr-2017

Accessories and Attachments

Miscellaneous

61 In. (1549 mm) Mulch Kit - BUC10060
Optional mulching attachment and blades (similar design shown)Optional mulching attachment and blades (similar design shown)
#
  • This is a high-performance mulching attachment that includes formed steel baffles to control the material for superior performance.
  • The special mulching blades can also be used for side discharging, though overall cutting performance may be slightly less than with the standard blades.

The mulching attachment allows converting the mower deck so it can be used to perform the mulching function (grass or leaves). And here's a small change.

 

These mulching attachments are used on QuikTrak™ mowers with cutting widths of 36 in. (91 cm), 48 in. (122 cm ), 52 in. (132 cm), and 61 in. (155 cm).

Operating tips when mulching:

  • Mow when grass is dry.
  • Observe the one-third rule.
    • No more than one-third of the grass blade should be cut off at one time. This allows more efficient mulching and will promote the continued good health of the grass. If the desired cut height can't be achieved by cutting off one-third, or there is clumping of the clippings, it may be required to cut higher; wait a day, then lower the mower and make a second pass.
  • Mow at proper intervals - approximately every four to five days.
  • Always mow with sharp blades.

Oil

Spark Arrester Screen for Muffler - AM108146
Spark arrester screenSpark arrester screen

Available to meet current law in areas requiring use of mufflers under certain conditions or where needed to comply with local ordinances.

Includes instructions, spark arrester screen and mounting hardware.