New 995 Reversible Plow

Primary Tillage
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Moldboard frame pivots with the bottoms
  • Plastic moldboard and steel shins
  • Landsides with wedges
  • Front gauge wheels

More Info

Features

Moldboard frame pivots with the bottoms
Moldboard frameMoldboard frame

All 995 Moldboard Plows use only one set of bottoms.

 

The moldboards are reversed laterally by a hydraulic cylinder that is standard equipment. There are several advantages of this design over traditional two-way roll-over plows with two sets of bottoms:

  • Requires less 3-point hitch capacity
  • Requires less ballasting of the tractor front end
  • Eliminates initial cost and service requirements for one complete set of standards and bottoms
Adjust front gauge wheels to limit plowing depth
Front gauge wheelsFront gauge wheels

The front gauge wheels can be adjusted to limit the plowing depth to 356 mm (14 in.). They come equipped with 6.70-15 tires.

Rear gauge wheels come in standard equipment
995 Moldboard Plow rear gauge wheels995 Moldboard Plow rear gauge wheels
#

Two front and one rear gauge wheels are standard equipment on the 995 Moldboard Plow:

  • Equipped with 6.70-15 tires for good flotation
  • Easy turnbuckle adjustment on rear gauge wheel
  • Adjustable front gauge wheels limit the plowing depth to 356 mm (14 in.)
V-style mainframe distributes weight for good penetration
995 mainframe995 mainframe
#

The V-style mainframe of the 995 Moldboard Plow distributes weight for good penetration.

 

The mainframe is made of high-strength 178-mm x 102-mm (7-in. x 4-in.) tubing that is 8-mm (5/16-in.) thick to handle the stress of high-horsepower tractors working in tough ground conditions.

Integral on-land hitch provides excellent maneuverability
Integral on-land hitch Integral on-land hitch
#

The integral hitch gives unexcelled maneuverability in turns and when parking in tight areas:

  • Category 3/3N Quik-Coupler compatible
  • Tractor rockshaft lever controls the raising and lowering of the plow
    • Maximum plowing depth to 356 mm (14 in.)
  • Provides ample clearance between the tractor tires and the plow

Accessories and Attachments

Bottoms

Plastic Moldboard with Steel Shins and Hardware - BP16596
Steel shinsSteel shins

Steel shins are available as a field-installed option only.

 

The frog is pre-drilled at the factory to accept this attachment.

 

With this attachment, the steel shins will allow longer wear life when soil first comes into contact with the plow, but still offers the option of a plastic moldboard for sticky soil conditions.

Hydraulic Cylinder

Hydraulic Cylinder - BP16287

Landsides

Landsides - BP16597
Double landsidesDouble landsides

Double landsides allow converting five- and six-bottom plows equipped with wedges for operation in hard ground conditions.

 

The bundle includes one extra set of landsides for the front bottoms, four regular large landsides for the rear bottom, and all necessary attaching hardware.

Landsides - BP16603
Double landsidesDouble landsides

Double landsides allow converting five- and six-bottom plows equipped with wedges for operation in hard ground conditions.

 

The bundle includes one extra set of landsides for the front bottoms, four regular large landsides for the rear bottom, and all necessary attaching hardware.

Landsides and Wedges - BP16598
Landsides with wedgesLandsides with wedges

This bundle is for five- or six-bottom plows. It allows converting five- or six-bottom plows equipped with double landsides for operation in average-to-soft soil conditions.

 

The bundle includes a set of wedges for all bottoms, one set of extra-large landsides for the rear bottom, and all the necessary attaching hardware.

 

NOTE: Due to line-of-draft characteristics, the seven- and eight-bottom plows do not require use of wedges.

Landsides and Wedges - BP16604
Landsides with wedgesLandsides with wedges

This bundle is for five- or six-bottom plows. It allows converting five- or six-bottom plows equipped with double landsides for operation in average-to-soft soil conditions.

 

The bundle includes a set of wedges for all bottoms, one set of extra-large landsides for the rear bottom, and all the necessary attaching hardware.

 

NOTE: Due to line-of-draft characteristics, the seven- and eight-bottom plows do not require use of wedges.

Warning Lights and Emblem

SMV Security Emblem - BP16365
Warning Lights - BP16298

Wheels and Tires

Two Front Gauge Wheels with 6.70-15 In. Tires - BP16600
Front gauge wheelFront gauge wheel

Front gauge wheels can be added to control the plowing depth.

  • Can be adjusted to limit the plowing depth to 356 mm (14 in.)
  • Equipped with 6.70-15 tires